Forum > LCD TV forum

Goodmans GTV26WLCD PSU problems

(1/1)

Vlad:
Hi
I got this TV last week. The problem is the PSU board STA180TV. TV switch on for 2 min and after  is going back in to stanby. Sometimes is working for a hour and sometimes is stuck in stanby.
Any idea? 

Vlad:
Thats the picture of it

daz:
hi
usually its bulgy caps in the secondary,also check the smoothing block, they can be a pain to change because of the heatsink
good luck
daz

jimca007:
Had two of these recently same symptoms changed 1000 uf caps on secondary output( the ones under the lip of the heatsink top right hand side ) I managed to just bend the heatsink up to get access but it is quite a chunky bit of steel so wouldn't really recommend that... :72:

Navigation

[0] Message Index