Forum > LCD TV forum

lg-37lg31rc

<< < (2/2)

daz:
hi willyam
haven’t seen this one yet so not going to be much help, but check the inverter does it use a bd9897fs if so I would change this first as they can give problems, also had problems with poorly fitted lg backlights intermittently arcing to the shielding at startup causing the set to go into fault mode, you will have to strip the panel down and check for burn marks near the ends of the tubes.(also check for loose tubes)
hope this is of some help
daz

WILLYAM1:
thanks daz i will check and keep you posted.
willyam1

Navigation

[0] Message Index

[*] Previous page