Forum > LCD TV forum

sanyo ce532wsd7-13 vestel problems

(1/1)

quak:
hi, i have a  sanyo ces32wsd7-13 tv with a standby fault, board inards are vestel,  avi board is 17MB22-2 021106 and psu 17PW20 V2. set switches on ok but switching set to standby with remote your left with blinking red standby led and set will not switch back on unless switched off at mains, psu is ok, 24LC02 prom chip is ok, both have been tested on different sets so im left with a fault on main board, any ideas?

lignitos:

--- Quote from: quak on January 23, 2011,21:38:44 ---hi, i have a  sanyo ces32wsd7-13 tv with a standby fault, board inards are vestel,  avi board is 17MB22-2 021106 and psu 17PW20 V2. set switches on ok but switching set to standby with remote your left with blinking red standby led and set will not switch back on unless switched off at mains, psu is ok, 24LC02 prom chip is ok, both have been tested on different sets so im left with a fault on main board, any ideas?

--- End quote ---

Hello Did you ever fixed this tv? what eas the problem,because I have the same problem and info appreciated please.

astracat:
hi ,have you checked to make sure no timer function been set,had one with same problem removed timer setting cured it
regards
astracat

jimca007:
this is quite handy to read thro. for 17pw20 faults .
See attachment

Navigation

[0] Message Index