Forum > LCD TV forum

Sharp stuck in stanby

<< < (2/3) > >>

astracat:
thanx sparky had this problem before myself but forgotten which buttons ,just trying to help out
astracat

Vlad:
 :41:
I try that. There is no service menu on the screen. The TV switch on after 10 seconds back light blink one time. But the TV stays on. I am able to see that on the screen is writed no signal. I try it 10 times but the TV is still doing the some thing.

astracat:
hiya
vol minus+input on tv then power when comes on press menu think thats how to get service ,if im wrong
somewhere on this forum is correct procedia
will still try and find you a way in
keep trying
g/luck
astracat

astracat:
sorry last post wrong.
should be vol and prog minus as soon as set comes on should be a letter k on screen scrol to lamp error should read 0 if not reset to 0
it may have faulty lamp but mine worked ok after reset
g/luck
astracat

Kilroys:
If you could see the picture in a sec. and then black screen,
you got a inverter problem. When you enter the service mode you disable
the protections and thats why the green led is on. Change the capacitor C7554.
Look at page 4

Navigation

[0] Message Index

[#] Next page

[*] Previous page