Forum > PLASMA TV forum

LG 50PS3000 not working

(1/2) > >>

dazzler:
Hi, my LG 50ps3000, press button to turn on, there is a click sound at the back, then blue light blinks 6 times then after 20 second ish turns red. Any help?

EARLYBIRD:
Hi.Check the fuse on the ZSUS panel,Try disconnecting the panel and see if you get the set to come out of the standby mode. This panel is becoming a common problem on that model.

dazzler:
Thank you EARLYBIRD, yes disconneted ZSUS panel and tv comes to life but with snow like picture and sound, do i buy a board and fit?  fuse seams ok, but some strange  browny red fuses are these gone?

dazzler:
Purchased ZSUS board and fitted, working perfectly. Thanks Earlybird again.  :yahoo:

TellyFun:
Just to a word of warning with these ,after replacing the z sus you may find that it will destroy itself again,this is caused by the control board,check that the z sustain heatsink is running cool,if its not then you have problems...sorry :c023:

Navigation

[0] Message Index

[#] Next page