Author Topic: NEC Multisync LCD4010 Backlight on but NO DISPLAY (Read 6329 times)

nectvuser · « **on:** February 23, 2011,18:40:34 »

My NEC Multisync LCD4010 does not show a display. The screen is black, but the blacklight does turn on. If the monitor is plugged in to a source the back light stays on, if not the monitor goes to stanby mode. I have replaced the video board, t-con, and power supply board in that order. There are no other boards to replace. What can be the problem? I have tried different input connections.

Mulja tv repair portal · « **on:** February 23, 2011,18:40:34 »

sparky · « **Reply #1 on:** February 24, 2011,06:46:25 »

hi
so this is just a moniter do you have a media box plugged in.
or just the tower from computer?
dave

nectvuser · « **Reply #2 on:** February 24, 2011,12:17:45 »

Hi Dave,

Thank you for your reply. Yes, this is just a monitor and not a TV. I plugged it in to different computers (Desktops and laptops) using both VGA and DVI-D and the results are the same, black screen with no display but the backlight stays on.

Mulja tv repair portal · « **Reply #2 on:** February 24, 2011,12:17:45 »

Turnip · « **Reply #3 on:** February 24, 2011,13:27:56 »

Hi NVU,

Nothing listed here - how about some panels piccies - we love 'em.

Well, I do - Chris.

Mulja tv repair portal · « **Reply #3 on:** February 24, 2011,13:27:56 »

Mulja tv repair portal

News: