Forum > CRT TV forum

sanyo eb8a28 chassis part va1601 what is it

(1/2) > >>

ernie:
i got this tv to fix that has lightning damage,cant find anything gone except for the optocoupler and possibly the power supply ic(tn6q04)i want to check this other part out wich is part place va1601 on the board the number on the part is 14c471 it looks like a ceramic cap but i cant get a reading of it does anyone know what va stands for and what this part should read as any info aapreciated

mulja:
What about fuse (ok)???
Don`t worry about va1601. ;)

ernie:
first thing i checked was the fuse which is ok and that is what i cant understand why the fuse is ok when the power supply ic has gone i would have thought it would have blown the fuse even though the fuse is ok and the switch and power cable is ok the set is completly dead no standby or anything this is why i wondered about this va part as something seems to be stopping the power getting to the ic.the capacitor in the power supply gets no charge either any info appreciated

mulja:
If you do not have 320v on capacitor
Check R602 (3.9oM) if he have (open circuit)
Replaced power supply ic TN6Q04 and D615 Zener (18v)


And i had same problem before(no st-by no nothing)
it`s was 3.3v from IC666 to microprocesor i found C201(220n was short circuit)

ernie:
r602 reads ok this is what i cant understand that is the only thing i can find gone in the power supply is the opto for sure,the tn6q04 ic i am not sure about but with nothing else being bad in the power supply makes me wonder if it has gone or not the only thing that made me thinck it has gone is because the two outside legs on the ic read straight across on my ohmmeter but without any specs on this ic i dont know if that is normal or not,anyway i have found c201 and will check that out.thanks for your info sorry about badgering on about this tv but i hate being beaten by it

Navigation

[0] Message Index

[#] Next page