Forum > LCD TV forum

baird x42dtv (lg) no picture

(1/2) > >>

bluesmoke:
hi i have been working on a baird x42dtv it  was stuck in standby but i found a swollen cap on the psu and 4 swollen caps on the invertors so i replaced them and i still cant get it to switch on the power light just flashes
i have 25v and 3.8v at the invertors and 5v 17.5v  25v at the psu but as im still a newbie i thought i would ask some experts
could it have shut down due to invertor fault ? and needs to be reset
the main board is a lg l42ta5a but also has haier py12032____q v1.5
any help will be apreciated

bluesmoke:
i just got a right belt off the psu  :41:
the heat shield to the left is measuring 130v ac when tested to earth ?
think i have got my self trouble and a dead arm

rebel-mc:
Hi, Last one I fixed I replaced the power supply with a 17PW15-08 in the end.  I was getting all voltages out of the power supply but it still wouldnt come out of standby (5v would drop).
I have bought a new power supply before from http://www.watt-power.co.uk.  But Iv'e just checked and I don't think they list them anymore. They were cheap from there as well.

bluesmoke:
hi thanks for the reply was it a straight fit or did you have to change any connectors etc cheers :08:

davenjax:
hi mate just out of interest what inverters are in this set? im working on a 47" and the only place i can locate the inverters is the states im guessing they are 6632l-???? cheers rgds dave

Navigation

[0] Message Index

[#] Next page