Forum > LCD TV forum

Samsung le40m86bdx eeprom clicking

(1/2) > >>

kingchristo:
Hi i have the common fault of the tv clicking. I opened it up and couldnt find any broken capacitors but i replaced them all just incase there was one that had gone that i couldnt see. The tv still clicks and doesnt come on. I read that you need to reset the eeprom chip but have no idea whitch one it is or how to do it any pictures would be great or a manual thanks hope someone can help me

sparky:
hi
just scroll to other listing last year full procedure

staight forward or just change eeprom chip
dave

mulja:
You can post picture and i point by finger  :72:

Usually on power board replaced all 10v1000mkf capacitors

and tv if still not start need replaced EEPROM  biside micom  24LC256
you can programm any yourself with all FF FF FF FF FF
becouse all settings he load from micom at first switching on

or buy here:
http://www.chsinteractive.co.uk/electrical-components/misc/ppm42s3-24c256bn-eprom-smd-i-c-samsung.htm

then you need to go to service menu
options
change READY  ON to OFF

sparky:
hi
when you change eprom it usually sets its self
dave

SUPER8:
The eprom is situated under the card reader slot and does not have to be programmed as the data is loaded from the micro

Navigation

[0] Message Index

[#] Next page