« previous next »
Pages: [1]   Go Down

Author Topic: 46" Sharp lcd  (Read 4507 times)

0 Members and 1 Guest are viewing this topic.

dougc

  • Hero Member
  • *****
  • Posts: 281
    • Email
46" Sharp lcd
« on: April 12, 2011,05:04:48 »
Hi All, Just got a sharp 46" (lc46-le600e) Stand by led goes off at switch on but set remains dead. Have tried psu panel. Looks like an e-prommy type fault. any ideas? Doug
Logged

Mulja tv repair portal

46" Sharp lcd
« on: April 12, 2011,05:04:48 »

Kilroys

  • Full Member
  • ***
  • Posts: 83
Re: 46" Sharp lcd
« Reply #1 on: April 12, 2011,09:42:23 »
Lamp error
then after reseting the lamperror
then do a usb upgrade to 1.38
Logged

dougc

  • Hero Member
  • *****
  • Posts: 281
    • Email
Re: 46" Sharp lcd
« Reply #2 on: April 12, 2011,11:52:07 »
Set is dead!!
Logged

Mulja tv repair portal

Re: 46" Sharp lcd
« Reply #2 on: April 12, 2011,11:52:07 »

sparky

  • Hero Member
  • *****
  • Posts: 1223
    • Email
Re: 46" Sharp lcd
« Reply #3 on: April 12, 2011,12:07:48 »
hi
dougc
by chance on the 32" models the on/off switch were faulty giving
simlair faults just a thought
dave
Logged

dougc

  • Hero Member
  • *****
  • Posts: 281
    • Email
Re: 46" Sharp lcd
« Reply #4 on: April 12, 2011,14:07:06 »
Hi Dave, yes I've come across that fault before on the sharp sets.
Logged

Mulja tv repair portal

Re: 46" Sharp lcd
« Reply #4 on: April 12, 2011,14:07:06 »
Pages: [1]   Go Up
« previous next »
 

download