Forum > PLASMA TV forum

lg 50pg6010 blanks screen

(1/1)

bluesmoke:
hi  would some one be so kind to help me i have a lg 50pg6010 that powers up and you can hear a relay clicking  a few times on the main power board  but the set only powers up to a black screen with both back lights on but when the relay clicks the screen switches off then back to black it does this a few times before just staying on and black
im not really familar with plasma's so really need a nudge int he right direction if possible
i can't see any bulged caps and all fuses seem ok
im getting 5v and 3v at the control board i have tried unplugging the ysus board but the set just displayed the red standby light any help would be great thanks dave

bluesmoke:
hi sorry to be a pain but has any one any tips on this problem just a black lit up screen .
or ideas on the best way to fault find which board is at fault as all boards seem expensive so dont want to buy the wrong one and i dont trust some of the smashed screen sets on ebay as i have been conned before

fix2003:
Check All outputs from the power board are correct VA, VS, 12V 5V 16,5V 9V M5V.
Are the Heatsinks on YSUS and ZSUS  cold ??
Check  fuses on each panel

Navigation

[0] Message Index