Author Topic: Eht transformer for Telequipment D83/D75 oscilloscope (Read 7809 times)

sparkman001 · « **on:** May 25, 2011,15:58:43 »

Long shot I know, but does anyone have an eht transformer for the above 'scope, or even an old scope for spares ? I'm trying to restore a D75 but the tx is u/s. Many thanks
Bill

Mulja tv repair portal · « **on:** May 25, 2011,15:58:43 »

t1412 · « **Reply #1 on:** May 28, 2011,18:22:42 »

hi i have an wayne kerr scope that works never really used it if that helps

regards
shaun

sparkman001 · « **Reply #2 on:** May 29, 2011,04:34:02 »

Hi, thanks for your post, I've replied to you with a personal message.
Bill

Mulja tv repair portal · « **Reply #2 on:** May 29, 2011,04:34:02 »

t1412 · « **Reply #3 on:** May 29, 2011,08:12:46 »

ok bill my email not working at the minute if you cover the postage you can have it. i'll send you a picture see what you think thanks

regards
shaun

sparkman001 · « **Reply #4 on:** May 29, 2011,08:59:41 »

Hi Shaun, thanks that's really good of you. I ll send you a personal message with address etc,
Bill

sparkman001 · « **Reply #5 on:** June 06, 2011,17:07:04 »

Many thanks to Shaun for his kind response, I now have a working scope again. However, for all of you following this thread, I would still really like to get my old Telequipment D75 working again, so if any of you do have one of the following models for spares, D75, D83 DM63, I still need the EHT transformer. Many thanks
Bill

Mulja tv repair portal · « **Reply #5 on:** June 06, 2011,17:07:04 »

Mulja tv repair portal

News: