Forum > DVD/VIDEO/Home Cinemas/Hi-Fi/Mp3/Camcorder

Panasonic DMR-EH50 (X Hold)

(1/2) > >>

Turnip:
Hi folks,

Got one of these where only action is a very dim "X Hold" in display when any button is pressed. Note on 'Fixya' they suggest press and hold OK and RETURN on RCU (no OK button so pressed ENTER)

Didn't work so any ideas ?  Thanks - Chris.

Turnip:
Hi Folks,

Guess from the silence 'Brainstorm' is on another well deserved furlough  - Chris

brainstorm:
Hi Chris,

Sorry the Clinic wouldn't release me until they said I was no longer a danger to the community.

The X hold is a child lock
To cancel the Child Lock
Press and hold [ENTER] and [RETURN] simultaneously until “X
HOLD” disappears.

The dim display is usually the display itself, but worth checking caps in supply just in case.

Make sure the RAM drive is working before you get your wallet out though!

Brian

Turnip:
H Brian and thanks,

Did as you suggested and the X HOLD turned into 00.00.

Pressing any button on set or RCU then causes X HOLD to re-appear.

Any more thoughts (terrified of kids maybe)  ?    Chris.

PS - Changed the 2 usual main 2200/16 caps

brainstorm:
Hi Chris

Thats strange,that normally works, the only thing I can suggest is to try a full reset:

Press [STOP], [CH UP] and [OPEN/CLOSE] keys simultaneously for 5 seconds when power is off.

The unit needs to be in standby and you are pressing the buttons on the machine and not the remote

Brian

Navigation

[0] Message Index

[#] Next page