Forum > LCD TV forum
Li Shin Power Supplys
(1/1)
Tmg:
Hi has anybody had any success in repairing Li Shin external psu's 12v 6a comonally used in toshiba, bush, ect.
I did once replace caps in secondary but soon failed again.
These psu's fail and cannot supply the current resulting in flashing led on psu or no backlights on tv.
Tmg:
I hope this may be of help to some one, after replacing all the caps in the external power supply. I removed the clear silicone type glue on both sides of the pcb.. So far so good maybe its cured it.
As recommended by another well known database system.
brian:
MANY THANKS Tmq,
THIS TIP HAS CURED THREE P/S , BE SURE TO REMOVE THE SILICONE FROM BOTH TOP AND BOTTOM OF PCB.
THANKS AGAIN BRI.
Navigation
[0] Message Index
Go to full version