Forum > LCD TV forum
SAMSUNG 19 LCD MODEL 932MW.....CODE LS19MASF/EDC
(1/1)
chrissie jones:
this set works fine untill picture dims then backlite goes out all togeather after 10 minutes...help please.
sparky:
hi
its the inverter transformer stock fault try wiltsgrove
dave
michael first:
hi,if it's mounted fan7314 as the inverter's controller,try to solder a wire between pin #1 and gnd;it works if the transformer is safe.
chrissie jones:
can you point out pin one for me please.
michael first:
hi,I'm sorry but I haven't a pic of it so look for the mark on ic's body(look for c624 mounted on pin #1);also,I have to point out the error I made,not a jumper but a 1k resistor!sorry
Navigation
[0] Message Index
Go to full version