Forum > LCD TV forum

Sharp LC-32D44E-BK

(1/3) > >>

johnsiddle:
Hi Guy's
I have a second Sharp that sometimes goes into standby and sometimes it fails to come on at all.

Any idea's

 :41: :41: :41:

t1412:
hi,check the smd resistor i soldered them the first time and the tv worked

regards
shaun

johnsiddle:

--- Quote from: t1412 on July 07, 2011,01:34:18 ---hi,check the smd resistor i soldered them the first time and the tv worked

regards
shaun

--- End quote ---

Hi Shaun.
Thanks for the reply, which resistor is this????
John

t1412:
ok john i've got the sharp 30hv4e in for repair i soldered the large black resistors. on mine they say 724 i'll get you a picture if you need it cheers

shaun   

johnsiddle:

--- Quote from: t1412 on July 07, 2011,12:26:13 ---ok john i've got the sharp 30hv4e in for repair i soldered the large black resistors. on mine they say 724 i'll get you a picture if you need it cheers

shaun   

--- End quote ---

Thanks Shaun a picture would be great, when you said SMD resistor I was thinking very small but large black resistors sounds like something else.  I assume the 724 is stamped on the resistors implying 724ohm;; Yes?
John

Navigation

[0] Message Index

[#] Next page