Forum > LCD TV forum

Vistron 37 No model number stuck in standby

<< < (3/3)

scooby-doo:
Hi

Thanks, I got the data of the chip and this is the pins, I have also put the readings I got from each pin

1=CS# = 3.27v
2=DO = 3.27v
3=WP# =0.0v
4=VSS = 0.0v
5=DI = 0.0v
6=CLK = 3.27v
7=HOLD# = 2.46v
8=VCC = 3.27v

Like you mentioned shorting the pins 5&6, doesnt do anything
What is the options now as you mentioned something about write protect, (Pin 3)

Is there away around this or do I now need equipment to reset the eeprom.

With thanks

watteau:
Hi,
Sorry I don't know of a way of resetting these type of EEPROMs.
You could try changing it with a blank one, if  you know the type.
Good luck,
John.

Navigation

[0] Message Index

[*] Previous page