Forum > LCD TV forum

Logik LCXW32HD1-Standby Transformer Problems

<< < (4/8) > >>

Ohm Supplies:
Hello,

Was there info. on the backer reminding you about the opto? do you now have 5v after the tx?

regards
Andy

Ohm Supplies:
If you do have 5v, try using the remote (that looks a lot like a Panasonic, doesn't it? :) )

regards
Andy

scooby-doo:
Hi Andy

Thanks for the reply, I did try the remote with no joy.

I also took the parts (u2, c22 & db1) and put them into the damaged board I bought from flebay, this gave exactly the same fault....Could there be a chance that I have blown FSD200 again as I initally put U4 in the wrong way round? Putting it the wrong way round gave me all the flashing control panel lights.

Thanks for any help in advance.

scooby-doo:
Hi

I have answered my own question and put another (know to work) fsd 200 in and the tv is still the same, the standby light seems to be very dull..

Is there anyway of checking the remote is working correctly?

Ohm Supplies:
Was it on the backer about the opto or can you tell me the optop type?

Navigation

[0] Message Index

[#] Next page

[*] Previous page