Forum > LCD TV forum

Alba lcd 32880H DF standby light flashing blue and red

(1/3) > >>

blackie1964:
Hi my alba lcd 32880H DF tv wont turn on,stanby light flashing blue and red, if left unpluged for a while it will work fine for hours before it shuts off and flashes ,no visible signs of bulging caps, unpluging the mainboard from the psu board while turned on and pluggin straight back in also cures it for varing amounts of time but doent really tell me which board is at fault. The psu board is a 17pw26-4 and the mainboard is a 17mb45m-2 any ideas please.

chrissie jones:
sounds like cap problem..

blackie1964:
Hi Chrissie that was my thought but none are obvious , i have no schematic and my meter wont test the caps ,other than change them all im lost ,im only a novice at this ,can anyone narrow it down please.

chrissie jones:
can you send me a piccie...

blackie1964:
There you go Chrissie hope it good enough

Navigation

[0] Message Index

[#] Next page