Author Topic: lg 50ps3000 ysus (Read 6272 times)

dougc · « **on:** November 10, 2011,07:53:48 »

Hi, I have a lg 50" with no picture. When I disconnect ysus board 64v is ok. Question is can I get away with finding just a ysus board or should I also be looking elsewhere? cheers, Doug.

Mulja tv repair portal · « **on:** November 10, 2011,07:53:48 »

lamirada · « **Reply #1 on:** November 10, 2011,12:34:18 »

y board

jimca007 · « **Reply #2 on:** December 04, 2011,18:39:37 »

how'd you get on with this one doug? I've got one with dim and sparkles filled picture which I suspect a duff y on but have been tempted to go with the x y and vid kit

Mulja tv repair portal · « **Reply #2 on:** December 04, 2011,18:39:37 »

Ohm Supplies · « **Reply #3 on:** December 05, 2011,15:01:39 »

Hello,

Have you checkd for a short on the X-sus?

regards
Andy

jimca007 · « **Reply #4 on:** December 05, 2011,15:10:48 »

no Andy not yet I'm kinda flyin blind on this one other than occasional psu repairs I dont really do much with Plasmas at all when gamefully employed it was a case of throwing boards at them till they worked which is fine when a manufacturers warrenty is pickin up the bill tend to find customers arent quite so keen on this approach !

Ohm Supplies · « **Reply #5 on:** December 06, 2011,14:55:14 »

Check for a short on the x-sus, there is a fault that can lead you to sometimes think the y is at fault

Regards
Andy

Mulja tv repair portal · « **Reply #5 on:** December 06, 2011,14:55:14 »

Mulja tv repair portal

News: