Forum > LCD TV forum

Bush LCD40883F

(1/2) > >>

Geoff S:
 :sign0085:

This Tv is not powering up but the standby light flashes rapidly. The PSU is 17PW26-4. I've done the usual mod incl reg replacement but still the same problem.

Ideas? Anyone?

Cheers
Geoff

Update: D893 s/c. Replaced, still the same. Hmmm

t1412:
ok hifiguy have you checked these parts C801,C804,C817,C892,andIC 831 hope it helps

regards
shaun  

Geoff S:

--- Quote from: t1412 on September 15, 2011,11:49:38 ---ok mark have you checked these parts C801,C804,C817,C892,andIC 831 hope it helps

regards
shaun 

--- End quote ---

Hey Shaun. Yes I've changed all the capacitors you mention plus ic829. I'm not seeing ic831 but I see ic830 near transformer. Could this be the ic you mentioned?
Thanks
Geoff

Geoff S:
For anyone interested for future reference. There's a 0 ohm smd that feeds the resistor that goes o/c.

Set up and running. :13:
Geoff

t1412:
ok geoff have you got a reference for that smd that went open ciruit thanks

regards
shaun :sign0098:

Navigation

[0] Message Index

[#] Next page