Forum > LCD TV forum

Toshiba 37X3030d Firmware Upgrade?

(1/3) > >>

All Mod Cons:
Hi All,
I have a Toshiba Regza 37x3030D which has been used as a monitor for the last couple of years.  I tried to use it as a TV the other day but it stuck on the initial menu and I couldn't get as far as tuning it.
I've been told the firmware is probably out of date and needs renewing.
Can anyone please point me in the right direction for some instructions on where to get the firmware and how to update it?
Thanks,
Richard,

brainstorm:
Hi

The firmware has been posted on this site before, you will have to search for it, it is the same firmware for the 32 inch. i.e the important bit is the 3030 part of the model number

You will also need the cabot tool

Brian

All Mod Cons:
Thanks Brian, I'll have a search for the 32inch firmware then.
Could you tell me what a cabot tool is please?

brainstorm:
Hi

The cabot tool is the software program that you will need to put the firmware onto your Sd card,
it's not like other types of firmware that you just copy onto the sd card

Brian

All Mod Cons:
Hi Brian,
I finally got round to attempting a firmware upgrade.  I used the Cabot PCMCIA PC tool V6 to load the following file to the Sd card:
EURO_a3030d_0056_mw0033_002d_for_service.img

All seemed to go OK. I transferred the card to the back of the TV and got the message 'updating' and then 'done' after a couple of minutes.  I turned it of and on again and got back to the main set-up menu but nothing seems to have changed. i.e. the menu will not allow me to navigate away from the first setting (language - English) and I can therefore not get as far as tuning it in.

Any ideas?  Do you think I've used the wrong img file? is there a later one?

Thanks,
Richard.

Navigation

[0] Message Index

[#] Next page