Forum > LCD TV forum
philips 32pfl5522d memory.
jimca007:
this is defo a firmware issue there is a fix for it but being Philips even the core programming changes from set to set you can phone technical and if your lucky enough to get a technical minded person and not a peanut eating monkey they'll e mail you a link to the correct firmware update for the set .
sparky:
you need the compair to do upgrade i believe also philips
are pulling out of tv market soon
brainstorm:
Hi chris
Ive got 3 of this chassis doing the same thing, but it will remeber the channels on one transmitter(belmont) but loses a Mux an another(Waltham)
Im experimenting with a few different methods and I will keep you posted if I get anywhere
Brian
jimca007:
funnily never had to do a firmware update on a phil theres so many other faults on these sets I've always had a spare mainboard from one i've been forced to scrap for some other reason !
astracat:
hi have you cured this problem yet.worst cases have had to fit a bandpass filter on aerial as said before done loads of them at wrk we are philips sevice agents dont forget to keep menu pressed on tv to get back to virgin mode after the update sent to you tv memory only holds 200 channels if it sees anymore it will dump original and try to fit them again
g/luck
astracat
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version