Forum > LCD TV forum

LG 42LF66 Problem with Screen

<< < (3/3)

Ohm Supplies:
Slow up.there.

I will look at the video of.the fault some time.but it.doesn't.sound like the same problem. I won't give advice or try to sell a kit if I don't think it will work. It's not what we're about.

.I'll advise later but please don't take the posting I've made out of context.

Regards
Andy

Ohm Supplies:
Having looked at the video of.someone switching a plug then it looks like the set isn't coming on & I'd guess at a psu fault as the other engineers.have implied. From the description, yes, it could be a similar fault as kit 153, however with the 2 faults together then I'd look at the inductors.Tony recommends removing if they are fitted to your board.

I'd like to say that both of the last 2 methods require a certain level of skill to carry the job off successfully without ruining the board & writing.the set off.

Regrads
Andy

mali67:
check to see if the top of the main board is getting hot.
I changed all the caps in that area as Andy indicated in the kit soley because i had narrowed it down to that area with a small fan.
The "kit 153" list it as a totally opposite fault to what i had but, The parts were in the correct area, i used electrolytic caps.
but will be getting the kit after the holidays to replace with the correct caps (like things looking nice)

Navigation

[0] Message Index

[*] Previous page