Forum > LCD TV forum

Bush A642F - main board problem ?

(1/3) > >>

Turnip:
Hi folks,

Have one of these that comes on on BBC1 perfect sound and picture but - neither RCU or set buttons work. Blue led flashes in sympathy with RCU. Unplugged local buttons in case of tact problem but no dice.

Any hope ?  Chris.

PS - Main board is 715G3462-1  Power/Inverter 715G3511

brainstorm:
Hi Chris

Sounds like it needs a service mode reset, but I don't know how you access it

I found this on the 'other' site so you can try it:

"Press and hold Menu button on front panel for about 5 secs, release the menu button and then press the menu button on the remote control. Note apply above operations to toggle between remote on and off"

Im not sure it makes a lot of sense but worth a shot

Happy Christmas

Brian

P.s Bah Humbug

Turnip:
Thanks Brian,

Will give it a go -

PS - Beware Crimble nocturnal 'visitations' - even at your age - Tiny Turnip

Turnip:
Hi Folks,

Thought to update this one as entering A642F on the interweb brings up similar problems where RCU and set buttons don't work.
Got a screen smash panel on Ebay and now set works well on it's buttons - RCU still giving blue flash on set but nothing else - Wilts don't yet do an RCU but suspect prob might be elsewhere.

PS. Thanks Brian for that other-site info - as you had guessed, it does nothing useful but kept me busy pre Crimble - Chris.

fix2003:
on A626 version
Bush A626 no remote functions
You can disable the remote control and/or the user control buttons on the set.
 :33:
A few ways to get out of this.

Press Menu button for 10 seconds on remote control to enable/disable remote functions.

Press the Menu button on the tv to enable/disable the TV user controls on the set.
 :13:

Navigation

[0] Message Index

[#] Next page