Forum > CRT TV forum

Ferguson Help

(1/3) > >>

Fergusson:
My tv repairer has fixed some faults that i wanted done but in the process  now has another problem where the sound and brightness goes from 0 to full with nothing inbetween .The set has had its battary replaced as part of the work  .It is  Ferguson Tx 51A3 .It is puzzeling him so i thought i would ask for help.

sparky:
hi
you will have to go into service mode to set up
cannot remember the red,green,blue,or yellow
buttons to press in what order  sorry try and
find service manual
dave

Turnip:
Hi,

Being a few days older than Sparky, I seem to recall the backup Nicad drooled down the vertical control panel LHS and corroded most everything beneath - perhaps a modern LCD could be an easier option and would save finding screen clips - Chris

dougc:
Hi, Can't remember the colours but to enter menu . Coloured buttons from left to right 1>2>4>3. Hope this makes sense, Doug

In_Focus:
No coloured buttons, 51A3 is pre Fastext.

To OP do the manual controls on the set work? it sounds like you have a memory problem, to store the settings you need to press the normalise store on the front of the set.

Navigation

[0] Message Index

[#] Next page