Forum > LCD TV forum

Wharfedale L32TA6A - Phihong PSM210-417A R issue

<< < (4/5) > >>

cdel:

--- Quote from: dervdub on April 19, 2012,04:59:18 ---Hi cdel,

Sorry I might be being a little thick here, I can't tell from the thread if the TV needs the 16v line or not, are you saying the PSU you mention will work fine if wired correctly?

yes,i saw the costumer early this afternoon and i ask about his tv.said still ok.


Thanks

Andy

--- End quote ---

dervdub:
Many thanks for the clarification cdel - very much appreciated.

cdel:
 :08:

dervdub:
Thanks Andy, I'm going to attempt the conversion this week hopefully.

I've prayed to the smoke gods in readiness  :dubbio:

dervdub:
Just a quick update, the MLT power supply is fitted and the set is alive again.

On the Phiphong PSU there is a 4 way cable (2 x ground & 2 x VADJ) - this cable caused me some confusion as I thought it was the 16v line, but looking at the main board in detail shows this is actually a 12v line - ran 12v from the MLT and "job's a goodun"

I've got it on burn in test now, looping some high bit rate MKV files to give the main board a good workout.

Thanks for all your help, with particular thanks to CDEL for pointing me in the direction of the MLT psi.

Navigation

[0] Message Index

[#] Next page

[*] Previous page