Forum > LCD TV forum

Wharfedale L32TA6A - Phihong PSM210-417A R issue

<< < (5/5)

clownposs:

--- Quote from: dervdub on May 08, 2012,10:52:25 ---Just a quick update, the MLT power supply is fitted and the set is alive again.

On the Phiphong PSU there is a 4 way cable (2 x ground & 2 x VADJ) - this cable caused me some confusion as I thought it was the 16v line, but looking at the main board in detail shows this is actually a 12v line - ran 12v from the MLT and "job's a goodun"

I've got it on burn in test now, looping some high bit rate MKV files to give the main board a good workout.

Thanks for all your help, with particular thanks to CDEL for pointing me in the direction of the MLT psi.

--- End quote ---

Hi dervdub,

I'm having exactly the same trouble like you with my PSU Phihong PSM210-417A-R and my LCD Wharfedale L32TA6A but I do not understand anything in electronics. I have just removed the PSU from the LCD to locate bad capacitors but the board seems complicated for untrained person like me. Is there a way to show me with a screenshot the location of your connectors on the MLT power supply.

https://onedrive.live.com/redir?resid=38DA2B4CFF281FC8%21233

Thank you very much in advance and sorry for my poor english :)

Turnip:
Hi Clownposs,

Met a few, so attach file - might be useful - Chris.

clownposs:

--- Quote from: Turnip on April 12, 2015,12:10:25 ---Hi Clownposs,

Met a few, so attach file - might be useful - Chris.

--- End quote ---

Thx I will check your doc aswell.

My actual PSU Phihong PSM210-417A R







The MLT 668 one that can replace mine like the thread creator suggests







Thanks

Navigation

[0] Message Index

[*] Previous page