Forum > LCD TV forum

IPLV-42 Rev 1.4. resistor values needed

(1/2) > >>

quak:
hi, im taking on a repair of IPLV-42 Rev 1.4. psu from atec av370w lcd tv, problem is failed caps C103, C104, etc,33uf and 0.68uf type, diode 601 is short in fact split, also resistor 108 and 104 burnt, can anyone tell me the values of these resistors as i cannot find schematic online, your help will be appreciated, regards andre  

fix2003:
diode 601 has been talked about as use either a 12v or 13v zenner the resistors i do not know
check also Q101

quak:
hi, have replaced diode 601 with 13 volt zenner, also Q101 which was short, + all surrounding caps, just these dam resistor values needed to complete repair, if anyone out there has this psu, and could check these values it would be very much appreciated! regards andre

jordan:
 :c023: which applience use this power board ????

quak:
hi, its from a Evesham Atec 37" Flat Screen, model AV370W.

Navigation

[0] Message Index

[#] Next page