Forum > PLASMA TV forum

hitachi 32pd5300 help needed

(1/2) > >>

aliris:
Hello...
I'm new here..
just need advice on the problem that I am having with my plasma
model hitachi 32pd5300

problem : when turn on, the red LED turn on a few secs and that it change into blinking orange/amber..

no picture or sound at all...

p.s I manage to get into test/diagnose mode by pressing two buttons simultaneously...the displays turn on and displaying alternate colour (white, black, green, blue etc)

any help is appreciated..

thanks

mulja:
I had that fault In 42PD5300.
Fault is in "Formater board"
This Set was under waranty and i just replaced
board.

Good luck

aliris:
thanks for your reply..
my unit is out of warranty ..do you know where can I get the spare board and how much should I pay for that..

thanks

mulja:
Board can get from hitachi but it is to expeceive
PWB FORMATTER UNIT ->UX24095
Part Number   CS00783
price is £500.34+vat

aliris:
for that price I would rather buy a new panel ...

by the way..today I manage to revive my plasma panel...after trying with different combination of button pressing, finally the LED turned from blinking orange to steady orange (by pressing sub power and down button simultaneuosly if I am not mistaken..) then I connect my laptop to it and change the input setting...wallaaa...the panel is alive again..

thanks

Navigation

[0] Message Index

[#] Next page