Forum > LCD TV forum

Vestel 17IPS15-4 inverter transformer

(1/2) > >>

Turnip:
Hi folks,
Just had a Sanyo CE19LD90V-B in where the blue s/by would go out but set wouldn't fire up. Noticed C171 (12p 3kv) across inverter trannie secondary was discoloured and measured 200k. Changed it but no go. Checked transformer secondary resistance - 711 Ohms. Fitted another trannie from scrap with a resistance of 713 Ohms and the set fired up OK.
Tranny part number - 30052713-01  LSE 0909 H - anyone know of a supply ?

Incidentally compared the 2 trannie version - trannies are larger - 30058444 SMP-C2146. My scrap one has secondary resistances of 718 and 750 Ohms, which might explain why it's duff - Chris.

Turnip:
Hi Folks,

Gather that 30058444 is available from ChasHyde for under a fiver, anyone know a supply of 30052713-01 - Chris.

daz:
Hi Chris
Try spared parts
http://sparedparts.com/parts/details/vestel_transformer_inverter_30052713/
 :08:

Turnip:
Hi Daz, and thanks.

Note they're expensive also they haven't got any at present. Out of curiosity, and for Quuq folks, what's secondary resistance of your new ChasHyde 30058444's.

Still think with testing trannies to buy a LCD scope and ring, or perhaps knock up a suitable driver and check input current.

Thanks again - Chris.

sparky:
hi
chris got scrap panel with 2 x 30058444 tx
pin 1-7 measures 2 ohms
pin 8-9 measures 750 ohms
hope it helps
dave

Navigation

[0] Message Index

[#] Next page