Forum > LCD TV forum

Acoustic Solutions PCB photo... where to start!?

<< < (2/2)

Davy:
Cheaper to replace em' than buying an ESR meter, at least this way you 'know' that they are new and not likely to give problems.

Whichever way you do it, always use high temperature 105 deg. C types (or higher) low ESR types, this is important.... use standard type capacitors and you'll soon be repairing it again, these are easily obtainable and not costly.

It's OK to up the voltage, say the caps are 1000uF 25V for example you can use 1000uF 35 Volts types..... take note of their sizes and pin spacing though. Components are usually packed like sardines making space very limited.

Dave

Turnip:
Hi,

Think there is some info Re - Acoustic Solutions 32761HD (Vestel) on Quuq files - Otherwise, always use good caps or move house frequently.

Davy has it right, but would still get an ESR meter, even if you ignore the 'Good' or 'In circuit' readings, and still change dodgy Bulged top or shrunken sleeved and where PCB is is a bit brown'ish under the cap even if ESR tester gives curious advice.

Always do meself - well - decent caps are still cheap and changing them will give a good reputation - and more important - repeated cash - Chris.

Sir Carlsworth:
really appreciate all the help guys! great website you have here...  :c017:

Navigation

[0] Message Index

[*] Previous page