Hello is an expert on this forum for this Grundig CUC 1983 chassis model : MW82-100/9 Pal Plus . Power supply is OK (works on bulb) . When you start the unit with remote commander high voltage start for a few secundes and after thet the unit stuck in stand by. I have replaced vertical IC TDA4173 all elkos which are on + and - " K " line. Flyback transformer is OK, +D;+C; +A ... all voltage are OK and the unit after 2-3 secundes stuck in stand by and you cannot start it agin til the power cable is unpluged from ~220V. Service Manuel I have .
If anybody hes a idea where can be defect please to share this idea with me to help me to fix the problem in this unit
Thanks in advance for any good help
Regards
Peter
Topic: Grundig MW82-100/9 pal plus stuck in stand by (Read 6248 times)