Forum > LCD TV forum

Samsung Lcd Tv Black Screen

(1/4) > >>

Bazzamer:
 :sign0144:
Hi All, From all of what i have read so far this is a wonderful site hope someone can please help.
I have a Samsung LE46C530F1WXXU which like many others has a problem, it will power on get the chime a flash of the screen then it sits black and can not see anything, then 15mins later it goes into standby.
After seeing many others on the net with problems, i changed the caps and went up to 25volts even though they looked ok. I contacted Samsung and they advised was a power supply problem but the capacitors are not affected on this model, i do not have a service manual to work from so its difficult to check voltages. The power supply board is BN44-00341B was only made in 10-3-11. One thing i did try was to disconnect the T-CON ribbon cable and power up, it made no difference which led me to believe it could be faulty, i seem to be going round in circles, and possibly missing something simple, have even looked at replacing all the boards for £59 but none in stock. That is the easy way out and world just love to find the answer and fix it.
Any help would be really appreciated.
Many Thanks
Bazzamer   :73:

t1412:
hi when you get these problems with samsung no picture fault usually down to buffer boards and y sus board, these are located on the left hand side of the tv, check the main fuse on the y sus also the soldered fuses and, it would be best to check the fuses on the z board this board is on the right hand side good luck.

regards
shaun     

dynomo:
One of those PSU's on Ebay £38  


http://www.ebay.co.uk/itm/Samsung-LE46C530F1W-Main-PSU-BN44-00341B-Working-Part-/170915046038?pt=UK_Sound_Vision_Other&hash=item27cb54a296

 :051bye: :051bye:

sparky:
hi
your tv lcd forget y and z panels not fitted
is there a separate inverter board if so check the
fuses

sparky:
hi
the psu have the inverter built in fit another power panel

Navigation

[0] Message Index

[#] Next page

Go to full version