Forum > LCD TV forum

Medion MD 20165 Monitor backlight fault

<< < (2/2)

netdent:

--- Quote from: coxtel1981 on November 05, 2012,11:49:29 ---Are electronic repair shops in england?   :93:

--- End quote ---

I'm in Scotland but yes there are plenty but probably too costly, I would never use one, would rather repair myself when possible

Turnip:
Hi netdent,

Could be a backlight tube problem - fairly common with 16:9 monitors. Tube tester would be useful, and can be knocked up using a scrap single output 12v inverter where built-in sensing will cut on duff tubes.

Good luck - Chris.

netdent:

--- Quote from: Turnip on November 06, 2012,12:40:45 ---Hi netdent,

Could be a backlight tube problem - fairly common with 16:9 monitors. Tube tester would be useful, and can be knocked up using a scrap single output 12v inverter where built-in sensing will cut on duff tubes.

Good luck - Chris.

--- End quote ---

Hi Chris,

Thanks, this thing is low low miles... and now it has settled down! been on for 4 hours no fault, will soak it for a few days dee what happens?

this looks good for the money?

http://www.ebay.com/itm/Universal-CC...item41606f799e

cheers Ronnie

Turnip:
Hi Ronnie,

Link seems to have been deleted. Recall there was one on offer cheaply from a well known company - ran only on 5v and had no tube feedback to cut on duff tubes.

Bought one - total rubbish - Chris.

Navigation

[0] Message Index

[*] Previous page