Author Topic: Goodmans GLCD32WDVBT stuck in standby..  (Read 4625 times)

0 Members and 1 Guest are viewing this topic.

SlyAKs

  • Jr. Member
  • **
  • Posts: 38
    • Email
Goodmans GLCD32WDVBT stuck in standby..
« on: November 15, 2012,17:59:56 »
Any ideas? Checked psu and changed a few visibly bad caps... tv is in standby and doesn't respond to remote or power button on side, not even a dimming of led... It seems like the main board isn't telling the power board to give it the beans.. I've read on this forum that the eeprom can become corrupted.. Tried unplugging it but tv still would not turn on.. Main signal board issue?

Mulja tv repair portal

Goodmans GLCD32WDVBT stuck in standby..
« on: November 15, 2012,17:59:56 »

jordan

  • Hero Member
  • *****
  • Posts: 896
Re: Goodmans GLCD32WDVBT stuck in standby..
« Reply #1 on: November 16, 2012,03:44:58 »
Chassis 17MB08P/Vestel
Replace both 15nF capacitors behind transformer on PSU
Greeting from Slovenia
Jordan Čebron

SlyAKs

  • Jr. Member
  • **
  • Posts: 38
    • Email
Re: Goodmans GLCD32WDVBT stuck in standby..
« Reply #2 on: November 16, 2012,03:57:29 »
Many thanks for the reply Jordan... I ordered those caps yesterday, so should be here today/tomorrow.. I assume they are a common failure? Hope they are the problem.. Thanks again, Sean.

Mulja tv repair portal

Re: Goodmans GLCD32WDVBT stuck in standby..
« Reply #2 on: November 16, 2012,03:57:29 »

SlyAKs

  • Jr. Member
  • **
  • Posts: 38
    • Email
Re: Goodmans GLCD32WDVBT stuck in standby..
« Reply #3 on: November 21, 2012,15:23:17 »
15nf caps made no difference at all.. are we looking at a main board fault?

Mulja tv repair portal

Re: Goodmans GLCD32WDVBT stuck in standby..
« Reply #3 on: November 21, 2012,15:23:17 »

 

download
download
download
download