Forum > LCD TV forum

Technika LCD26.920

<< < (2/3) > >>

sabre504:
Try this

jordan:
17IPS06-2

Keith:
Hi Les,

You will find it more cost effective to fit a replacement board if you can get one!

Keith

OldLes:
Keith, I used to trace everything down to component level, and don't see why not to today. I am retired, so my time cost nothing. I just don't have much time to spare, what with the work provided by SWMBO, and all that I store up myself. Still working on my Cagiva Alazzurra 650, and that takes priority.

However, back to this Technika.

Looked at it again today whilst my pal visited (another retired TV man) and found more faulty components.
R444,5,6,7,8 and 9 all O/C. Replaced those and still dead. I decided to remove the associated transformer (TR900) and found the primary winding also O/C. I suppose if I had studied the circuit more, I would have spotted it sooner.
So, does anybody have one? It is marked 30062467,     SMP-C2264. Maybe a spare faulty board to save time removing it. As long as the winding 5-6 is intact (no pin 4).
One problem with this is that various components on the circuit simply don't exist on the board.
OldLes.

OldLes:
Can nobody help with this?

Recap: 26" Technika (Model LCD26-920) with PSU 17IPS06/2.
The 3.3V standby transformer primary is O/C following the failure of various components (see above).
It  is marked 30062467, and  SMP-C2264.

There must be a few of these boards lying around with a transformer to spare?
Even a new transformer if I can source it. Who stocks them?
Les.

Navigation

[0] Message Index

[#] Next page

[*] Previous page