Forum > Immobilisers
Renault immobiliser bypassing code
delambo:
Sorry, that is the later ECU ( ithought it was the early one). The decice in this is 95p08. it is marked 5P08C3 and is ST.
Seeprog is the best tool to read this with (around £50stg) from crownhill associates - or I have a schematic. Sometimes it will read as 95080 on programmers which do not support 95p08 but it is not 100% reliable.
If you cannot find the 95p08 ask and I will mark it on the photos you uploaded.
mulja:
yes i found the eeprom it is 5p08c3 but i do not have programmer for it
i just have for 24cxx 93c xx 25xx where i can buy one or better go when for Emmulator
mulja:
I think i must to go for Immulator because i cant get any where programmator for st95p08 probably i will buy one when find where
but car must be fix fast
Ok what way i can buy of you immo emmulator and you provide some instruction for fiting.
Thanking you
delambo:
If you wish to buy a programmer then seeprog is the best, but you cannot buy it from Crownhill any more and I do not know where to buy it.
If you wish to build Seeprog yourself then I can send you the schematic and.brd file so you can etch your own PCB.
Or you can send me the ECU and I will read and program the 95p08 for you.
Or if you wish to fit an emulator then you must remove and open the UCH. Inside is a 93c56 (I think, or it might be a 93c56). Read this and send me the dump and I will program you an emulator from your dump and send you fitting instructions. Otherwise you must post me the UCH and I can fit an emulator inside for you.
mulja:
What is UCH?
Can i just post to you chip i resolder out and send it to you
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version