Forum > Immobilisers

Renault immobiliser bypassing code

<< < (4/5) > >>

delambo:
The UCH is the body control mudule.  It is inside the fuse box.

It is up to you.  You can desolder the 95p08 and post it to me, I can modify it and send it back, but I do not get a 100% working dump every time.  If you do this you may need to post it back and forward a few times before it works.  If you can program it by yourself then I can send you dumps and you can test them quickly rather than wait for the postman.

If you want you can send me the 93cXX from the UCH and I can read it and program you an emulator.

It is up to you.

mulja:
I will try to find the UCH 93cxx in fuse box
and i can read myself i have programmer for it
and give to you dump it`s will help you to programm emulator

mulja:
I am ordered programmer for st95p08 it`s takes some few days before i will get it  :smile: then i read eeprom and post it here ok.

Thanking you Delambo talk to you later.

delambo:
It is really important to remember you must use hot air to desolder the 95p08.  It is glued to the board and you must soften the glue.  I tried to desolder one using traditional methods and pulled 2 legs off the the 95p08, I also damaged the PCB.  95p08 are hard to find if you do damage it, but you can get them from Mark 5.

Good luck.

mulja:
Just got thru door programmer
Again all details off
Renault SCENIC 1.9DCI
ECU
BOSH
0 281 001 934

HOM8200039569

8200078730


Here is dump of eeprom ST95p08

Navigation

[0] Message Index

[#] Next page

[*] Previous page