« previous next »
Pages: [1]   Go Down

Author Topic: Samsung LE32R88BD  (Read 4792 times)

0 Members and 1 Guest are viewing this topic.

Turnip

  • Administrator
  • Hero Member
  • *****
  • Posts: 3520
    • Email
Samsung LE32R88BD
« on: September 10, 2010,12:36:11 »
Hi folks,

Had one in today with red led and now't else. Found RM801(R22) O/C and C810(2n2) secured with our fave glue which had flashed over.

Haven't seen it listed on site, but must be common.

Natch a piccy, of sorts - Chris.
Logged

Mulja tv repair portal

Samsung LE32R88BD
« on: September 10, 2010,12:36:11 »

cheeky2

  • Sr. Member
  • ****
  • Posts: 174
Re: Samsung LE32R88BD
« Reply #1 on: December 22, 2012,11:51:30 »
Had the same set in and found one of the caps the cm861 1000uf 10V was shot on the PSU and the fuse f1 on the Tcon board had blown. The original problem was the inverters were on but no picture but sound!
« Last Edit: December 22, 2012,11:56:46 by cheeky2 »
Logged

Turnip

  • Administrator
  • Hero Member
  • *****
  • Posts: 3520
    • Email
Re: Samsung LE32R88BD
« Reply #2 on: December 23, 2012,12:37:16 »
Hi Cheeky, nice one,

Mine featured conductive glue that was a fave a while ago in some Eastern sets - gets hot and eventually carbonises causing phuts.

Fortunately discontinued as makers have recently used faux rubber that at least doesn't cause shorts, but loses it's stick - See Vestel 17PS -whatnot main caps, always found just hanging there, but no prob.

Thanks again - Chris.
Logged

Mulja tv repair portal

Re: Samsung LE32R88BD
« Reply #2 on: December 23, 2012,12:37:16 »
Pages: [1]   Go Up
« previous next »
 

download