Forum > LCD TV forum

toshiba lcd invertor replacement question

(1/1)

jaggsy1986:
I have a 37 inch toshiba regza lcd with faulty invertor , i have seen ones that look exactly the same on ebay but out of 32 inch tv's and some 42, i was wondering if they would be ok as a replacement. model number for mine is 6632l-0442a ones i've seen are near enough the same but have a few numbers different at the end, all are 94v. thanks in advance

marky mark:
If its exactly the same part then it will fit, we've fitted same parts in the past and not had many problems. :051bye:

bluesmoke:
hi is this the invertor
http://www.ebay.co.uk/itm/Inverter-LG-Philips-6632L-0442A-PPW-CC37TS-0-J-LCD-TV-Part-the247enigma-/200872701920?pt=UK_Sound_Vision_TV_Boards_Parts&hash=item2ec4f22fe0

jimca007:
The connections on the invertor plug generally are marked with their designation, if the wiring in the plug is the same, the number of outputs to the tubes are the same number and size,  and thirdly,  the board physically fits in the gap you have for it then it should work without any problems . As they say you cant put a square peg in a round hole but with a hammer, chisel and file anythings possible !

Navigation

[0] Message Index