Forum > PLASMA TV forum

Philips 50PF7320/10

<< < (3/3)

Bob Peddle:
Hi Vladimir,
Thank you very much for the plasma details - looks like it may be useful.
I am away from the office for a few days, so will investigate when I return.
Thanks once again for your kind assistance.

Best regards,

Bob

Bob Peddle:
Hi Vladimir,

Thanks once again for the display diagrams, there are some slight differences as my chassis is a Samsung SDI type S50HW-XD04.
However, I think I have found the problem - the series zeners D5017 and D5018 on the Y Main board Assy.  LJ41-02317A are both short circuit.
Any way of finding these device types?

Best regards,


Bob

alessandrotecnic:

- the series zeners D5017 and D5018 on the Y Main board Assy.  LJ41-02317A




the zeners is 33v and check the drive  top board.

StuartStardust:
@Vladimir

Can you please upload to 2k6 manual again?
SDI_PDP_2K6_312278516381_EN.pdf

I cannot get the last link to work.  :unknw:

I got the Samsung PDP S50HW-XD03

I will start up, but shuts off again within 5-10 sekunds. Picture does not start up.
Then I will have to remove the ac plug and connect it again to start it again for 5-10 sek.

Thanks

Navigation

[0] Message Index

[*] Previous page