Forum > LCD TV forum

Samsung UE40C5100QWXXU Solved !

<< < (2/3) > >>

dynomo:

--- Quote from: jordan on February 05, 2013,02:25:58 ---SM

--- End quote ---

Thankyou Jordan ! Much Appreciated. :c017:

dynomo:

--- Quote from: jordan on February 05, 2013,02:25:58 ---SM

--- End quote ---


Thanks to Jordan posting the schematic I have found the problem. Found 8.5k ohms across bridge rectifier + - After some investigation found CP818 / 100pf at 1KV burnt on the side. I guess under rectified mains the caps resistance was only a few Ohms. Enough to take out the 6.3amp fuses.

Thanks Jordan ! :sign0098:

imran khan:
You are a most respected for me but I am really surpriesd  your eye test level of circuit board is very weak.This was a basics of repair and you should upgrade your skills.

dynomo:

--- Quote from: imran khan on February 05, 2013,05:56:50 ---You are a most respected for me but I am really surpriesd  your eye test level of circuit board is very weak.This was a basics of repair and you should upgrade your skills.


--- End quote ---

Charming, thanks alot. Not the easiest thing to always spot when your eyes get tired.

chrisantony:

--- Quote from: dynomo on February 05, 2013,07:37:47 ---
--- Quote from: imran khan on February 05, 2013,05:56:50 ---You are a most respected for me but I am really surpriesd  your eye test level of circuit board is very weak.This was a basics of repair and you should upgrade your skills.


--- End quote ---

Charming, thanks alot. Not the easiest thing to always spot when your eyes get tired.

--- End quote ---

You should of gone to specsavers....I take it Imran, you have never missed a blown component, I wish I had a £1 for every blown/burnt component I missed after looking boz-eyed for 15-30minutes.

And sometimes...just sometimes, if you have a major short on a SMPS and the usual suspects (Fets, Bridge, etc) have not SC'd then it can be a "b***ox" moment, fair play to you Dynomo, some people dont even bother about schematics/component level repair, they would of been on flebay ordering a new board.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version