Forum > LCD TV forum

Sanyo CE42LD33-B

(1/4) > >>

Fisher69:
Hi There
I was wondering if anyone can help me I'm trying to take the back off my TV I have taken all the phillips screws out but there is about 6 screws in the centre of the TV do I need some sort of tool to get these off if I know what to buy I'll go and purchase one.
     Regards
       Fisher

marky mark:
Nope, I think it just needs 1 tool to open it and you fit the bill. :s_laugh:

Are there any even part time Tec's still on this forum?

jimca007:
I think the screws your referring to are the screws left in place to allow you to wall mount your tv . If its always been on a stand and not wall mounted they're prob bloody tight if the screw driver fails to moved them see if you can borrow a set of vice grips and clamp onto the outer circumference of the screw head that might give you enough leverage to " crack " the thread once moving the screws generally come out no bother. I use, and have used for many years the wee 3.6v B&D pistol power screwdriver and find it excellent for tv screws.

Davy:
Some sets you can take all the screws out then still have to unclip the back as they are held by lugs as well.

Whilst on about back removals we also need be careful..... it may be the front trim comes off after screw removals, leaving the screen to be parted before getting to the innerds.

Dave

jimca007:
 Too true  dave got caught with that front off not long ago on a wee combi and your spot on with the clips I use a wee 1.5 inch scraper lets you pop them no bother without leaving the tell tale round chunks taken off the mating edge !

Navigation

[0] Message Index

[#] Next page