Forum > LCD TV forum

Samsung LA32R81B Washout pictures

(1/1)

mikecarel:
Hi,

I've got problem with my samsung LCD with model number LA32R81B, Its now having a washout pictures when powered on and normalized after 2 minutes. Tried to check everything on its power supply and found no faults on it. Please refer to link below for the clearer view of the problem.

http://i1210.photobucket.com/albums/cc402/mikecarel/20130627_205034.jpg

Hope someone clearly guide me to identify the root cause of this problem.

Tnx,

Mike

t1412:
try and clean the ends of the  lvds cable that connects to the tcon board, and the connection on the tcon board use paper the abrasiveness will clean the contacts hope it works

regards
shaun

downunder:
I'd say you have a faulty AS-15G ic on the T=Con board.

mikecarel:
Thank for all the replies,

You are all right that the problem was in the t-con, using a x10 magnification lens I found a cold solder around the as15g chip. This was the cause of washout picture at cold start.

Thank you for pointing out where to start troubleshoting this problem. It is now working fine after resoldering the cold areas.

Tnx,

Mike

Navigation

[0] Message Index

Go to full version