Author Topic: Logik LCX27WN2 (Read 5267 times)

raybla · « **on:** July 12, 2013,14:45:52 »

Hi all, I have a Logik lcd tv model lcx27wn2 - fault: power applied red led switch 0n green led screen flashes on blue can see mode osd then screen goes blank led remains green - I have tried another inverter board with no luck - any ideas please Ray

Mulja tv repair portal · « **on:** July 12, 2013,14:45:52 »

jordan · « **Reply #1 on:** July 13, 2013,02:29:54 »

Check transformer on inverter board

fix2003 · « **Reply #2 on:** July 13, 2013,02:51:44 »

Remove the main board screening can
and look where the inverter plug goes into the main board. You will see a number of surface mounted chokes which feed the 12v supply to the inverter. They are usually discoloured and high resistance. Link them out with wire

Mulja tv repair portal · « **Reply #2 on:** July 13, 2013,02:51:44 »

raybla · « **Reply #3 on:** July 16, 2013,17:44:53 »

Hi thank you for the tips here with this Logik lcd tv - I have checked this and it is not the problem however I dont seem to have 24 volts at the inverter socket thats marked 24 volt if thats a clue maybe - the power packed has checked out ok under a lamp load and is supplying a steady 12volts - any further help please

jordan · « **Reply #4 on:** July 31, 2013,03:47:52 »

On the PCB main board check L-21 and L-168

raybla · « **Reply #5 on:** August 03, 2013,05:17:48 »

Hello anyone have a circuit diagram of the mainboard please its type - NEE 2M for this Logik lcd tv model lcx27wn2
thanks
Ray

Mulja tv repair portal · « **Reply #5 on:** August 03, 2013,05:17:48 »

Mulja tv repair portal

News: