Forum > LCD TV forum

Sharp 32" LC-32SH130K no power

<< < (2/2)

downunder:
It could be the power supply, or it could be the main board has a short to ground on the STB-5V rail, thus rendering the power supply inert. Disconnect the main board from the power supply....should only be one plug. Switch the tv on and see if the power now develops a 5V rail on at least 1 pin of the connector you've unplugged. If no, then power supply is shot, if yes, then reconnect main board and check if the 5V is present still, If no, then it's the main board that's crisped.

Todboy:
Hi,
There is no 5v voltage to the main board pins on the power board.

Thanks,
Tod

downunder:
Well, that's fairly conclusive then. Fault is on the power board, but be wary, there may well be collateral damage to the main board too.

Navigation

[0] Message Index

[*] Previous page