Forum > LCD TV forum

Toshiba 32AV554D

<< < (2/2)

Turnip:
Hi Watteau,

Had one in a while ago - a 555 with the same mainboard and stuck in S/by. Thought Eeprom, ordered one from ChasHyde then fitted it in the wrong place, not realising there were two Eeproms.

Upshot - Set was gifted by cust then found the Sharp screen MB version on Fleabay for a decent price - job done.

Note you suggest that other Eeprom is blank - wonder why ?

Thanks again John - Chris.

PS - Mention as other dorks like me might make the same error - Note, the S/by led was glowing B4 the MB replacement jobby.

Davy:
No standby light whatever. I get all the command pulses from the tac switches so I reckon that clears the button panel problem even pulses from the IR sensor.

I've had sets with eprom problems and  the standby light illuminated one way or the other, maybe I'm getting misled because I thought this one blinked as they are booting?

I'm wondering if it's a 'power ON reset', a pulse at switch ON to start all the chips on a datum line for the boot sequence to begin.

Data seems to be coming out the eprom well, one of em' IC151... pointless just changing one, you can bet if you did that it would always be the other one.

Thanks for the replies anyway, don't see you before Crimbo all the best and have a great New Year.

Davy

Navigation

[0] Message Index

[*] Previous page