« previous next »
Pages: [1]   Go Down

Author Topic: Baird TE-40LED-AL = Dead  (Read 4770 times)

0 Members and 1 Guest are viewing this topic.

Tmg

  • Full Member
  • ***
  • Posts: 82
Baird TE-40LED-AL = Dead
« on: January 24, 2014,21:25:54 »
Hello
I have a Baird TE-40LED-AL and it is dead the power supply board number is BSFP4120-001A  (picture attached)
Has anyone had this fault and did the power supply cure the tv, or is it the main board
I have no voltages apart from a standby 5v from the board but the main power will not be turned on and no lights
thanks in advance
Regards
Tony
Logged

Mulja tv repair portal

Baird TE-40LED-AL = Dead
« on: January 24, 2014,21:25:54 »

jordan

  • Hero Member
  • *****
  • Posts: 896
Re: Baird TE-40LED-AL = Dead
« Reply #1 on: January 25, 2014,03:23:04 »
Check Q4 (2SK3568) and elements near this-check drive elements of this Q4,check regulator 3,3V (U5) on main board
Logged
Greeting from Slovenia
Jordan Čebron

clark97

  • Sr. Member
  • ****
  • Posts: 102
    • Email
Re: Baird TE-40LED-AL = Dead
« Reply #2 on: January 25, 2014,07:35:59 »
You can use an older mlt199tl supply the black one, its pin for pin and works fine. I had one in about a year ago and was having trouble sourcing parts so I fitted one of those and its still running.
Logged

Mulja tv repair portal

Re: Baird TE-40LED-AL = Dead
« Reply #2 on: January 25, 2014,07:35:59 »

Tmg

  • Full Member
  • ***
  • Posts: 82
Re: Baird TE-40LED-AL = Dead
« Reply #3 on: January 25, 2014,17:34:52 »
Hi
Thank you for your replies and help I will investigate this over the weekend
Logged

Mulja tv repair portal

Re: Baird TE-40LED-AL = Dead
« Reply #3 on: January 25, 2014,17:34:52 »
Pages: [1]   Go Up
« previous next »
 

download