Forum > LCD TV forum

Firmware for Sony WAX2 chassis for the FEE board DM 2.5.515 board anyone?

<< < (5/5)

cheeky2:
You can download a utility that if you have a sony memory reader it will format the memory stick in the correct format, that way you don't have to have a sony camera to format it!
 I was lucky i picked up a selection of sony memory cards and camera for a £5 at car boot! I suspect that the newer memory cards (duo) are just too fast for the TV to recognise the older ones are significantly slower in operation.
 Here is the link for it
http://www.sony-asia.com/support/download/213460
 I only used the DM2.5.515.ZIP file to update the FEE board the others i couldn't use them as they required other hardware to update the several packages which i don't own. TV is still working well without any issues with freeview and the epg.
Good Luck

 

--- Quote from: Turnip on January 21, 2015,13:19:21 ---Hi Folks,

Had the problem a while ago and it seems that only early Sony 8Mb memory sticks will do the job using the Sony camera connected, and larger modern Sony memory sticks just don't seem work, for some reason.

Just a thought, as my 'Nine flash' was a duff Fee board where an update couldn't recover it, though I tried with a trusted 8Mb  Memory stick.

So changed the Fee board from screen smash scrap - OK - Chris.

Well done Cheeky, tried a later stick and as you suggested - it doesn't work, tried copying data to computer from 8Mb stick, but not having a Sony camera, natch' it didn't work as computer saw no files.

--- End quote ---

Navigation

[0] Message Index

[*] Previous page

Go to full version